服务热线: 18367320777
您当前的位置:网站首页 > 新闻动态 > 公司新闻

六角护坡模具价格-六角护坡模具在搬运和使用时应该注意的问题

网站编辑:海盐华丰塑业有限公司 │ 发布时间:2020-03-21 

六角护坡模具是所制作的水泥制品是各类工程施工和建设当中必不可少的一种塑料模具,使用六角护坡模具可以极大的提高工程进度及工程质量.但是还有一些我们必须注意的事项,以下是一些需要注意的地方。

Hexagonal slope protection mold is a kind of plastic mold that is necessary for all kinds of engineering construction and construction. The use of hexagonal slope protection mold can greatly improve the progress and quality of the project. But there are some things we must pay attention to. Here are some things to note.

1、六角护坡模具在搬运时,注意上下模或动定模在合模状双手(一手扶上模,另一手托下模)搬运,注意轻放、稳放。进行模具拆装工作前必须检查工具是否正常,并按手用工具安全操作规程操作,注意正确使用工量具。

1. When the hexagonal slope protection mold is being transported, pay attention to the upper and lower molds or the movable fixed molds to be transported in the closed hands (the upper mold is supported by one hand and the lower mold is supported by the other hand). Before carrying out the disassembly and assembly of the mold, it is necessary to check whether the tools are normal, and operate according to the safe operating procedures of hand tools, and pay attention to the correct use of measuring tools.

六角护坡模具_六角护坡塑料模具_华丰塑业

2、拆装六角护坡模具时,首先应了解模具的工作性能,六角护坡模具基本结构及各部分的重要性,按次序拆装.使用铜棒、撬棒拆卸模具时,姿势要正确,用力要适当。

2. When disassembling the hexagonal slope protection mold, you must first understand the working performance of the mold, the basic structure of the hexagonal slope protection mold and the importance of each part, and disassemble in order. When disassembling the mold using copper rods and pry bars, the posture must be correct and the force must be appropriate.

3、使用螺丝刀时:螺丝刀口不可太薄太窄,以免紧螺丝时滑出.然后在进行堆放时,应该注意高度不能超过2.3米,还要避免重压和挤压,防止模具变形,模具不能和有害气体放一起,还要避免热源.

3. When using a screwdriver: The screwdriver should not be too thin or too narrow to prevent it from slipping out when tightening the screws. Then when stacking, you should pay attention to the height not exceeding 2.3 meters, and avoid heavy pressure and extrusion to prevent mold deformation and mold failure Keep away from harmful gases and avoid heat sources.